April 2016 Steeplechase Social Pictures

12 04 2016

CPN members enjoyed a Saturday of horse racing, tailgating, fun, and fellowship at the Stoneybrook 65th Annual Steeplechase at the Carolina Horsepark in Raeford, NC. Another fantastic social planned by Bobbi Brumsey, Osborne Brumsey & Associates, CPN Social Chair. Check out the photos and fun!

http://www.youtube.com/watch?v=lMBntS4wkzs – Check out the video of one of the races!

Advertisements




A Regional Glance at February…

17 02 2016

CPN is divided into regions representing each area of the state of NC. Western, Piedmont, and Eastern. Each region has been hosting non-formal events across the state for members to learn, snag CEU’s, and get to know each other. Events like lunch and learns hosted by CPN members, to a brewery gathering, and a cooking school French feast…take a look at what’s been going on so far this year.

 

 





January 2016 Statewide Meeting Recap

25 01 2016

The January statewide membership meeting was held in the eastern region at 302 W. Main Street in Durham, NC. Members and guests gathered to get updates on the association, CPNI volunteer trips, and learn about Self-Help. Kim Cameron, Team Leader, Self Help Real Estate Team went gave a good portfolio of the projects that Self Help is involved with in Durham and Greensboro. After the program, attendees gathered at 21C Museum Hotel in downtown Durham for drinks, appetizers, and networking. (21C Museum has glass door bathrooms that fog over when occupied…something worth checking out!)

This slideshow requires JavaScript.





2015 CPN Sporting Clay Challenge Round-up

13 11 2015

Thank you to all the sponsors and shooters who celebrated Veteran’s day with CPN on Wednesday, November 11, 2015. CPN held our 2nd annual Sporting Clay Challenge at Hunting Creek Preserves in Harmony, NC on a beautiful fall day. Congratulations to 1st place winners -The Davie Construction Team (Bryan Bowles, John Stiltner, Kyle Winslow, Mark Muller)  & 2nd place winners – The Labor Source Team (CPN member Terry Lester, David Woods, Paul Yodis).

Over 50 shooters enjoyed a southern style lunch, raffles, prizes, and much more. Thank you to CPN member Dale Beatty, Purple Heart Homes for delivering a special Veteran’s Day message to our group.

The 2015 Shooting Committee organized a fantastic event to raise funds for the CPN Institute. A job well done. We look forward to next year’s tournament.

2015 Planning Committee

Richard Conner, Conner Gwyn Schenck PLLC – Chair
Janet Brooks, Clark Nexsen
Chuck Cardwell, SKA Consulting Engineers
Robert Coon, Scott Insurance
Mark Davis, Triad Design Group
Terry Lester, Labor Source
Ron Rothrock, Ron Rothrock & Associates
Jarrad Smith, IMCI
Leo Stepansky, Shelco LLC

 

This slideshow requires JavaScript.





CPN of NC Golf Tournament Recap

9 10 2015

The CPN Golf Tournament was held on Tuesday, October 6th at Sapona Ridge Country Club in Lexington, NC. Sapona Ridge Country Club is owned by the NASCAR legend Richard Childress. The 2015 Golf Chair Mark Davis, Triad Design Group and committee members Sun Breza, ECS Carolinas and Nick Vrettos, Vrettos Pappas Consulting Engineers organized a great tournament.

The festivities kicked off with a Lexington style BBQ lunch sponsored by R.L. Vanstory Co.  The day included networking, fun, and beautiful weather. Thank you to all the golfers who came out to support CPN and to all of our sponsors whose generous donations made the event possible. The reception featured yummy eats and the ball drop was a huge hit. 500 golf balls were dropped from a bobcat sponsored by DH Griffin Construction Co, the ones that fell closest to the hole were our grand winners.

Congratulations the First place winners –the New Atlantic Contracting Team (John Merrill, David Reeves, John Morrison, and John Deleonarois)

Congratulations to the second place winners – the HICAPS team (Keith Fuquay, Mark Koenig, Steven Fuquay, and Peyton Fairbank).

Ball Drop winners were:
1st ($400) – Steve Batten , Triad Design Group
2nd ($200) – Bill Richardson
3rd ($100) – Shawn McGinnis  McConnell Golf

We look forward to seeing everyone back in 2016!

This slideshow requires JavaScript.





Fall Statewide Member Meeting Recap

21 09 2015

The CPN Fall Statewide membership meeting was held Thursday, September 17, 2015 at the UNCG Police Building in Greensboro. 60 Members and guests from across the state gathered to hear about the Construction of the UNC Greensboro Railroad Pedestrian Underpass, UNCG’s Mixed Use House Project Areas, and UNCG’s Campus Master Plan. Featured speakers included Jorge Quintal, Associate Vice Chancellor, UNCG; Fred Patrick, Director, Facilities Design & Construction, UNCG; Ricky Adkins, John Morrison, & Michael Hardman, New Atlantic Contracting, Inc. Attendees got a tour of the new UNCG Police Building, a K-9 demonstration, chance to participate in a putt-putt contest for free mulligans in the 2015 Golf Tournament, and a fully loaded reception sponsored by New Atlantic Contracting featuring brisket tacos, pigs in a blanket, fried mac and cheese bites, fruit kabobs, chips and salsa, popcorn chicken, ice cream, and cupcakes.

This slideshow requires JavaScript.





Six Things North Carolina Construction Professionals Should Know About Drone Operations

10 09 2015

Six Things North Carolina Construction Professionals Should Know About Drone Operations

Brooks Pierce

by Stephen Hartzell, shartzell@brookspierce.com

It is clear that the construction industry understands that drones may be an effective new tool in the contractor toolbox—for marketing, job progress documentation, inspections, communication with the owners and architects, and job site safety, to name a few possibilities.  What individual contractors might not fully understand, however, is what laws and rules currently govern the use of drones for business purposes, and how to ensure that drone use on the construction site is legal.

While you consider how you may one day integrate drones (also called “unmanned aircraft systems” or “UAS”) into your business, here are six things to keep in mind:

(1) “Generally, it is against the law to operate a drone other than as a hobbyist.”

There are currently two types of UAS use defined by the FAA, “hobbyist” and “all other.”  Thus, if your operations are not in strict conformity with all of the “hobbyist” restrictions and criteria, including not using the drone for business purposes, then you fall under the “all other” category.  Of course, any drone use by a business at a construction site is going to fall outside of the “hobbyist” category, which means that, under federal law, UAS operations at a construction site will be unlawful unless the FAA has specifically granted your business permission to use drones.

North Carolina law similarly divides operations into the same two categories, which is important because the North Carolina UAS statutes prohibit certain activities (discussed below) for UAS operators who are not hobbyists.  (North Carolina law uses the term “model aircraft” and defines it in the UAS statute as aircraft “flown solely for hobby or recreational purposes” such that it is not “used for payment, consideration, gratuity, or benefit, directly or indirectly charged, demanded, received, or collected, by any person for the use of the aircraft or any photographic or video image produced by the aircraft.”)

(2) “But, the FAA has a process to grant limited permission for drone operations, including at construction sites.”

The FAA has a mechanism by which it grants permission to businesses and individuals to allow commercial drone operations.  This so-called “Section 333 Exemption” process has resulted so far in approximately 1,500 Exemptions, including some to members of the construction industry.  Since April, the FAA has been granting Section 333 Exemptions at a faster pace using a streamlined “summary grant” process. Under this process, if the operations proposed in are not materially different from operations that have already been the subject of an Exemption, the FAA will grant the petition without subjecting it to public comment. Of course, even under the summary grant process, the FAA will continue to review each petition individually; without a review, the FAA would be unable to determine whether the proposed operation is, in fact, substantially similar to one already granted.  For UAS flights that will exceed 200 feet above ground level, the holder of a Section 333 Exemption must make an additional filing with the FAA in order to obtain a “COA” (certificate of authorization), and all drone operations that will occur within 5 miles of an airport or heliport will need to obtain specific authorization from the airport itself to engage in the operations.

(3) “You are going to need a pilot to fly the drone.”

To date, all FAA exemptions have required that the operator hold an airman certificate. While the grants issued during the period from September 2014 through February 2015 required the operator to have at least a private pilot airman certificate, the FAA now routinely permits operation of UAS (under an Exemption) by persons with recreational pilot or sport pilot certificates. The FAA has repeatedly made it clear, however, that it does not believe it has the authority to permit operation of aircraft (unmanned or otherwise) by a person without an airman certificate.  The FAA’s proposed UAS rules would establish a new airman certificate for UAS operators.  Thus, any construction industry professional who wants to incorporate drones into their business operations will either need to have a pilot on staff or contract with a party who has a pilot on staff to perform UAS flights.

(4) “No matter who is flying it, you’d better be concerned about the privacy rights of those you fly over.”

Nationally, the privacy implications of UAS use are far from resolved, but North Carolina law specifically restricts all persons and entities (including state agencies) from using UAS to conduct surveillance of a person or without his or her consent or on a piece of property without the owner’s consent.  It is also illegal in North Carolina to photograph someone for commercial purposes using a drone without that person’s consent; while the law provides an exemption for newsgathering organizations, there is no exemption for construction companies.  Drone operators that are found to have violated these privacy protections in North Carolina could be liable to the tune of $5,000 for each instance plus attorney fees.

(5) “North Carolina is ahead of the curve, regulating actions and uses of UAS that other states haven’t addressed.”

 With the recent increase in reports of authorized UAS use hindering firefighters, disrupting commercial aircraft and generally causing a nuisance, a growing number of states and municipalities are weighing their own use guidelines and restrictions while awaiting the final FAA rules.  North Carolina remains a leader in this area. In addition to the privacy protections referenced above, North Carolina laws specifically prohibit certain UAS-related conduct, including the following:

(a)        The launch or recovery of a drone from any State or private property without the consent of the landowner

(b)        Attaching a weapon to a drone

(c)        Using drones to fish or to hunt or to interfere with the lawful taking of wildlife

While construction professionals are unlikely to be interested in the use of drones for hunting or fishing or for the purposes of weaponization, the landowner consent provision may be an important consideration at certain locations.

(6) “Both patience and knowledge are required for commercial UAS operations.”

In North Carolina, state law requires commercial drone operators to pass a “knowledge test”—which will cover certain aspects of North Carolina’s drone laws—and secure a permit prior to engaging in commercial operations, even after the operator already has secured FAA authority for UAS operations.  As of the date of publication of this article, North Carolina has not yet implemented its knowledge test or permitting process, which begs the question whether commercial operations are allowed in North Carolina at all at the current time.  Fortunately, one of the key revisions in the latest North Carolina UAS law (passed in August 2015) clarifies that if a UAS operator has FAA authority to commence operations (for example, pursuant to a Section 333 Exemption), it is OK to go ahead and being operations in North Carolina despite the fact that the knowledge test and North Carolina permitting process are not yet available.

Brooks Pierce attorney Stephen Hartzell advises clients in UAS-related matters including compliance with FAA, state operational and licensing regulations, Section 333 Exemption requests, contractual and intellectual property issues, and drone-related privacy issues. He welcomes UAS conversation, and can be reached at shartzell@brookspierce.com.